Coolant suction and replacement apparatus

A vehicle’s cooling system will depend largely on the quality of the coolant. Why quality? Because coolant before its time loses its benefits and properties, and it doesn’t protect the engine as well. It is therefore essential to check it regularly and replace it every 2 or 4 years depending on the vehicle. Today, there are stations such as Flash Cooling®, whose motto is “a device that sucks up and replaces the coolant in a few minutes”

SUCTION DEVICE AND COOLANT REPLACEMENT: THE ADVANTAGES.

The importance of the coolant is highlighted several times. To facilitate its maintenance, there are specially dedicated machines such as Flash Cooling®. These are machines that can be used to drain, purge, replace the coolant and also to check for leaks

This device creates a vacuum in the cooling circuit and then fills it with vacuum. It also helps to recycle used coolant. Speaking of this replacement operation, unlike the old methods, the machine’s operation is simple. It is simply connected directly to the vehicle’s expansion tank.

Another advantage is that it does not require any dismantling on the car. As for the rest, the operation is not only quick and easy. Less than 10 minutes are enough to perform the operation.

Completely autonomous, the machine does not require any source of compressed air. Those who do not like the noise of the machines will be happy because it is really very quiet.

COOLANT IS ESSENTIAL FOR THE ENGINE

Without a vehicle coolant check, problems can occur such as reduced engine performance or corrosion of cooling parts. It is imperative to replace the coolant, it is recommended to do it every 2 to 4 years depending on the vehicle. Of course, it is necessary to drain, purge, but also to refill the tank so that the cooling system can function perfectly. In this way, the coolant will not only help maintain a constant temperature in the engine. It prevents the engine from overheating or freezing water inside. Coolant, if in good condition, is also known to protect against corrosion, to lubricate moving parts, to protect metal or rubber parts in the cooling system.